Posts fromElsa Sangouard

Last week Will was able to escape his desk for a few days and help take apart the last elements of the port gun carriage.

The complete braking mechanism was still in place, but by separating all of the parts we are able to maximize the amount of salts extracted from the artifact down the road (aka: a conservator’s dream!). After studying the historic blue prints (see historic plan below), we knew that one piece was the key to this puzzle. We also knew that we would need access to both the upper- and under-side of the carriage. In order to gain access to both, Will custom welded a rig allowing the artifact to stand vertically during treatment.Read more

上周,维ry ice cleaning was performed on the port gun carriage’s wrought iron frame. This is the second time that this object has been cleaned with this technique. The first time was last spring and the carriage has been under electrolytic reduction since April. Speaking of electrolytic reduction (AKA “ER”), we often mention it but rarely explain the method. This is a stabilization technique that is used every day in this lab (and broadly in the field of conservation) and we can forget that it is not a simple matter… Our website has a great animation to illustrate the process, check it outhere!

Last Wednesday was quite an exciting day for the team as we had fellow East Coast archaeological conservators visiting for the entire day! Nichole Doub from the Maryland Archaeological Conservation Laboratory, Johanna Rivera from the Clemson University Restoration Institute (working on the H.L.Hunleyin Charleston, SC) as well as Emily Williams from The Colonial Williamsburg Foundation were introduced to the joy that is dry ice blasting. Our project manager, Will, worked to establish the ideal parameters to clean wrought iron artifacts from the USS监控collection with dry ice over the last few years. During our colleagues’ visit, he shared the process that has been developed here and advised them on the procedure to follow, should they decide to invest in such a cleaning tool in the future. The day resulted in many nerdy conservation discussions regarding the original surface of artifacts, active corrosion processes and other pH related questions. Thrilling!!Read more

In addition to the “tank-farm-team-effort” that has been going on here for almost three months, a lot of work has been done around the lab. On Mondays and Fridays, tanks are either draining or filling which gives us all the opportunity to carry on other treatments.
For instance, a few weeks ago Laurie and I cleaned the starboard carriage tank. Microorganism growth had been developing over the summer due to the increased heat and light and it was time to give it a little TLC.

Lesley and I later cleaned another large tank in the wet lab containing a ventilation engine. Maintenance requires not only scrubbing the tanks, but also changing reference electrodes, making sure the multimeters and pH probes are working properly and preparing new solutions. This involves lifting 50lbs sodium hydroxide bags. Yes we can!
Recently we were also all very pleased with the treatment outcome of an air flask from the starboard Worthington pump. Images speak for themselves:Read more

We have been quite busy in the turret these past weeks and are making great progress!

While Lesley, Kate and I worked inside the turret to gently deconcrete, remove the nutguards and clean behind them, Will has been fabricating custom-made anodes for said nutguards. He first welded together a large stainless steel table able to accommodate what is left of 6 nutguards. As seen in this image:
Read more

This week was devoted to tours of the turret and we had outstanding visitors! Thank you all so much for your support!!

Lesley also completed the interior documentation of the nutguards before our attempt at separating them from the turret’s wall next week. There will be more blog updates on the topic in the near future.Read more